 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output March 2008 NC7SZ126 TinyLogic(R) UHS Buffer with 3-STATE Output Features Space saving SOT23 or SC70 5-lead package Ultra small MicroPakTM leadless package Ultra High Speed; tPD 2.6ns Typ. into 50pF at 5V VCC High Output Drive; 24mA at 3V VCC Broad VCC Operating Range; 1.65V to 5.5V Matches the performance of LCX when operated at General Description The NC7SZ126 is a single buffer with 3-STATE output from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance above ground when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. The output tolerates voltages above VCC in the 3-STATE condition. 3.3V VCC Power down high impedance inputs/output Overvoltage tolerant inputs facilitate 5V to 3V translation Patented noise/EMI reduction circuitry implemented Ordering Information Order Number NC7SZ126M5X NC7SZ126P5X NC7SZ126L6X Package Number MA05B MAA05A MAC06A Product Code Top Mark 7Z26 Z26 FF Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Connection Diagram Pin Assignments for SC70 and SOT23 Logic Symbol Function Table (Top View) Pad Assignments for MicroPak Inputs OE H H L H = HIGH Logic Level L = LOW Logic Level X = HIGH or LOW Logic Level Z = HIGH Impedance State Output A L H X OUT Y L H Z (Top Thru View) Pin Description Pin Names A, OE Y NC Description Inputs Output No Connect (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 2 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT IIK Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current @ VIN < -0.5V @ VIN > 6V DC Output Diode Current @ VOUT < -0.5V @ VOUT > 6V, VCC = GND DC Output Current DC VCC /GND Current Storage Temperature Parameter Rating -0.5V to +6V -0.5V to +6V -0.5V to +6V -50mA +20mA -50mA +20mA 50mA 50mA -65C to +150C 150C 260C 200mW 150mW IOK IOUT ICC / IGND TSTG TJ TL PD Junction Temperature under Bias Junction Lead Temperature (Soldering, 10 seconds) Power Dissipation @ +85C SOT23-5 SC70-5 Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VCC VIN VOUT Supply Voltage Operation Supply Voltage Data Retention Input Voltage Output Voltage Active State 3-STATE Operating Temperature Input Rise and Fall Time VCC = 1.8V, 2.5V 0.2V VCC = 3.3V 0.3V VCC = 5.0V 0.5V Thermal Resistance SOT23-5 SC70-5 Parameter Rating 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC 0V to 5.5V -40C to +85C 0ns/V to 20ns/V 0ns/V to 10ns/V 0ns/V to 5ns/V 300C/W 425C/W TA tr , tf JA Notes: 1. Unused inputs must be held HIGH or LOW. They may not float. (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 3 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output DC Electrical Characteristics TA = +25C Symbol VIH VIL VOH TA = -40C to +85C Max. Min. 0.75 x VCC 0.7 x VCC Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 1.65-1.95 2.3-5.5 1.65-1.95 2.3-5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 Conditions Min. 0.75 x VCC 0.7 x VCC Typ. Max. Unit V 0.25 x VCC 0.3 x VCC VIN = VIH IOH = -100A 1.55 1.7 2.2 2.9 4.4 IOH = -4mA IOH = -8mA IOH = -16mA IOH = -24mA IOH = -32mA VIN = VIL IOL = 100A 1.29 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.0 IOL = 4mA IOL = 8mA IOL = 16mA IOL = 24mA IOL = 32mA VIN = 5.5V, GND VIN = VIH or VIL, VO = VCC or GND VIN or VOUT = 5.5V 0.08 0.10 0.15 0.22 0.22 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 1 1 1 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.25 x VCC 0.3 x VCC V V VOL LOW Level Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 10 10 10 V IIN IOZ IOFF Input Leakage Current 3-STATE Output Leakage Power Off Leakage Current Quiescent Supply Current 0-5.5 0-5.5 0.0 A A A ICC 1.65-5.5 VIN = 5.5V, GND 2.0 20 A (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 4 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output AC Electrical Characteristics TA = +25C Symbol tPLH, tPHL TA = -40C to +85C 2.0 2 0.8 0.5 0.5 1.5 0.8 2.0 2 1.5 1.5 0.8 2.0 2.0 1.0 1.0 0.5 13.8 11.5 8.0 5.5 4.8 6.0 5.3 15.6 12 8.5 6.0 5.3 14.5 12 8.5 6.0 5.0 pF pF pF Figure 2 ns Figure 1 Figure 3 ns ns Figure 1 Figure 3 Figure 1 Figure 3 ns Figure 1 Figure 3 Parameter Propagation Delay VCC (V) 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 Conditions CL = 15pF, RD = 1M, S1 = OPEN Min. 2.0 2 0.8 0.5 0.5 Typ. Max. Min. Max. Units Fig. No. 6.4 5.3 3.4 2.5 2.1 3.2 2.6 8.4 6.1 3.8 3.2 2.3 6.5 5.6 4.0 3.5 2.5 4 8 13.2 11 7.5 5.2 4.5 5.7 5.0 15.0 11.5 8.0 5.7 5.0 13.2 11 8.0 5.7 4.7 tPLH, tPHL Propagation Delay Output Enable Time 3.3 0.3 5.0 0.5 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 CL = 50pF, RD = 500, S1 = OPEN CL = 50pF, RD = 500, RU = 500, S1 = GND for tPZH, S1 = VI for tPZL, VI = 2 x VCC CL = 50 pF, RD = 500, RU = 500, S1 = GND for tPHZ, S1 = VI for tPLZ, VI = 2 x VCC 1.5 0.8 2.0 2.0 1.5 1.5 0.8 2.0 2.0 1.0 1.0 0.5 tPZL, tPZH tPLZ, tPHZ Output Disable Time 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance 0 0 3.3 5.0 (2) 17 24 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static). (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 5 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0MHz, tw = 500ns Figure 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit Figure 3. AC Waveforms (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 6 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Tape and Reel Specifications Tape Format for SC70 and SOT23 Package Designator M5X, P5X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ.) 3000 75 (typ.) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimensions inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8mm 8mm Dim A 0.093 (2.35) 0.130 (3.3) Dim B 0.096 (2.45) 0.130 (3.3) Dim F 0.138 0.004 (3.5 0.10) 0.138 0.002 (3.5 0.05) Dim Ko 0.053 0.004 (1.35 0.10) 0.055 0.004 (1.4 0.11) Dim P1 0.157 (4) 0.157 (4) Dim W 0.315 0.004 (8 0.1) 0.315 0.012 (8 0.3) (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 7 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Tape and Reel Specifications (Continued) Tape Format for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities Cavity Status Cover Tape Status 125 (typ.) 5000 75 (typ.) Empty Filled Empty Sealed Sealed Sealed Reel Dimensions inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C D N W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) www.fairchildsemi.com 0.512 0.795 2.165 (13.00) (20.20) (55.00) (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 8 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Physical Dimensions C L 3.00 2.80 5 4 A 0.95 0.95 B 3.00 2.60 1.70 1.50 2.60 1 2 3 (0.30) 0.95 1.90 0.50 0.30 0.20 CAB 0.70 1.00 TOP VIEW LAND PATTERN RECOMMENDATION SEE DETAIL A 1.30 0.90 1.45 MAX 0.15 0.05 C 0.10 C 0.22 0.08 NOTES: UNLESS OTHEWISE SPECIFIED GAGE PLANE 0.25 8 0 0.55 0.35 0.60 REF A) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) MA05Brev5 SEATING PLANE Figure 4. 5-Lead SOT23, JEDEC MO-178, 1.6mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 9 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Physical Dimensions (Continued) Figure 5. 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 10 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output Physical Dimensions (Continued) 2X 0.05 C 1.45 B 2X 0.05 C (1) 1.00 (0.49) 5X (0.75) (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.05 C 0.45 0.35 TOP VIEW 0.55MAX A PIN 1 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X CBA C 0.10 0.00 6X DETAIL A 1.0 0.40 0.30 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 6. 6-Lead MicroPak, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 11 NC7SZ126 -- TinyLogic(R) UHS Buffer with 3-STATE Output TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EZSWITCHTM * TM (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FlashWriter(R) * FPSTM FRFET(R) Global Power ResourceSM Green FPSTM Green FPSTMe-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP-SPMTM Power220(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM -3 SuperSOTTM -6 SuperSOTTM -8 SupreMOSTM SyncFETTM (R) The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production (c)1996 Fairchild Semiconductor Corporation NC7SZ126 Rev. 1.10.0 www.fairchildsemi.com 12 |
Price & Availability of 7Z26
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |